Why a water nibble beats a bowl in the kennel
If you're tired of refilling and spilling water bowls, a Lixit water nibble offers a self-serve alternative. Your dog licks the control lever to release water, and the flow stops when licking stops. That means fresh water on demand and far fewer messes to clean up.
The L-70 Lixit Water Nibble is designed to screw onto any standard 1/2-inch pipe fitting, so it integrates easily with many kennel watering setups. It can be installed horizontally or at an angle, giving you flexibility based on your dog's height and kennel layout.
What the L-70 Lixit Water Nibble includes
- L-70 Lixit Water Nibble: Mounts a 1/2 inch pipe fitting This is the connection standard you'll need to match with your existing plumbing or a new pipe run.

L-70 Lixit Water Nibble - L-70 Lixit Water Nibble: Water flows out of the center of the nipple Knowing the flow point helps you position the nibble so your dog can reach it comfortably.
- L-70 Lixit Water Nibble: Adjust the flow of water from 20-60 PSI You can regulate water release to avoid waste and splashing, as long as your supply pressure falls within this range.
- L-70 Lixit Water Nibble: Can be installed horizontally or at an angle This flexibility lets you accommodate different dog sizes and kennel configurations.
- L-70 Lixit Water Nibble: Crafted from top-quality stainless steel Stainless steel is durable and easy to clean, which is important for a device that dispenses drinking water.
How to install the L-70 Lixit Water Nibble
- Step 1: Prepare your pipe fitting: Ensure you have a standard 1/2-inch pipe fitting where you want to mount the nibble. The nibble screws directly onto this fitting.
- Step 2: Choose the mounting angle: Decide whether to install horizontally or at an angle (the catalog mentions a 45-degree angle as an option). Consider your dog's height and reach to pick the most accessible position.
- Step 3: Attach the nibble: Screw the L-70 Lixit Water Nibble onto the pipe fitting. Hand-tighten to avoid damage; no specific torque is provided in the catalog.
- Step 4: Adjust water flow: Use the included orifice disc to regulate water pressure between 20 and 60 PSI. Start at a lower pressure and increase gradually until your dog can drink comfortably without excess splashing.
- Step 5: Test and observe: Turn on the water supply and check for leaks. Let your dog investigate and lick the nipple. Adjust the angle or flow if needed.
Tips for daily use and maintenance
Once installed, the nibble requires minimal maintenance. Because it's stainless steel, you can wipe it down regularly with a damp cloth. The catalog does not specify a cleaning schedule or recommended cleaners, so follow general hygiene practices for pet waterers and consult your veterinarian if you have concerns about biofilm or water quality.
Monitor your dog's water intake to ensure they're drinking adequately. Some dogs take to the nibble immediately; others may need encouragement. If your dog seems hesitant, try adjusting the flow or angle to make access easier.
The L-70 Lixit Water Nibble is designed to reduce spills and provide fresh water, but it is not a substitute for veterinary advice. If your dog shows signs of dehydration or illness, contact your vet.
What the catalog does not confirm
The supplied product information does not include specific cleaning instructions, recommended water pressure settings beyond the 20-60 PSI range, or compatibility with all pipe types. It also does not state whether the nibble is suitable for outdoor freezing conditions. For these details, check the manufacturer's documentation or contact the seller.
Additionally, the catalog does not provide guidance on training dogs to use a water nibble. Some dogs may need a transition period from bowls to a nibble; patience and positive reinforcement can help.


